View MN15G0804_285793.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN15G0804
Type ROM (x8-bit) x RAM (x4-bit) x Package Number of Instructions Minimum Instruction Execution Time Interrupts Timer Counter
MN15G0804 8K 512 QFP044-P-1010E *Pb free 103 0.96 ms at 1/4 frequency dividing (at 2.4 V to 5.5 V, 32 kHz) 1.91 ms at 1/8 frequency dividing (at 2.0 V to 5.5 V, 32 kHz)* * The lower limit for operation guarantee for EPROM built-in type is 2.3 V. VRST when using auto reset. * RESET * IRQ1 * IRQ2 * IRQ3 Timer counter 0 : 8-bit x 1 (event count, pulse output) Clock source ********************* 1/2 of system clock frequency; RMO; TCO2; TCI input Timer counter 1 : 8-bit x 1 (event count, pulse output) Clock source ********************* 1/2 of system clock frequency; fout1; TCO0; fXI Possible 16-bit cascade connection with timer counter 0 Timer counter 2 : 8-bit x 1 (event count, pulse output) Clock source ********************* 1/2 of system clock frequency; RMO; fXI; TCI input Time base timer Watchdog timer
I/O Pins LCD
I/O
34
* Common use : 34 * Specified pull-up resistor available : 34 (software programmable) * Specified output architecture available : Nch open drain / push-pull : 34 (software programmable)
21 segments x 4 commons (1/2 , 1/3 , 1/4 duty) Duty and period are variable. Auto reset circuit selectable (mask option)
Remote Control Output Notes
216
MAC00003AEM
MN15G0804
Electrical Characteristics
Supply current
Limit Parameter Symbol IDD1 Operating supply current Supply current at HALT Supply current at STOP IDD7 Auto reset power cunsumption IDD9 fXI = Stop 1.0 3.0 3.5 6.0 IDD2 IDD3 IDD6 Condition min fXI = 32.768 kHz (1/8 dividing) when using multiply circuit fXI = 32.768 kHz (1/8 dividing) fXI = 32.768 kHz (1/8 dividing) fXI = 32.768 kHz typ 3.0 10 3 2.0 max 5.0 40 15 5.0 mA A mA A A A Unit
(Ta = -10C to +60C, VDD = 3.0 V, VSS = 0 V)
P00/key0 P01/NSYNC/key1 P02/TCO/key2 P03/NTC1/key3 P10/key4 P11/key5 P12/key6 P13/key7 NIRQ/P20 RMO/P30 NRST
PA0/SEG21 P93/SEG20 P92/SEG19 P91/SEG18 P90/SEG17 P83/SEG16 P82/SEG15 P81/SEG14 P80/SEG13 P73/SEG12 P72/SEG11 34 35 36 37 38 39 40 41 42 43 44
Pin Assignment
33 32 31 30 29 28 27 26 25 24 23
MN15G0804
Support Tool
In-circuit Emulator EPROM Built-in Type
PX-ICE1500 + PX-PRB15G1604-QFP044-P-1010E Type ROM (x 8-bit) RAM (x 4-bit) Minimum instruction execution time MN15GP1604 16 K 512 0.96 s at 1/4 frequency dividing (at 2.4 V to 5.5 V, 32 kHz) 1.91 s at 1/8 frequency dividing (at 2.3 V to 5.5 V, 32 kHz) Package QFP044-P-1010E *Pb free
P71/SEG10 P70/SEG9 P63/SEG8 P62/SEG7 P61/SEG6 P60/SEG5 P53/SEG4 P52/SEG3 P51/SEG2 P50/SEG1 COM3/SEG0
1 2 3 4 5 6 7 8 9 10 11
22 21 20 19 18 17 16 15 14 13 12
VLC1/P40 VLC2/P41 VLC3/P42 OUTC VSS XO XI VDD COM0 COM1 COM2
QFP044-P-1010E
*Pb free
MAC00003AEM
217
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of MN15G0804

	To Download MN15G0804 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .